Operation on the Machine > Scanning with FMU Connection
245
Scanning with FMU Connection
"FMU Connection" is installed on the machine as a standard application. FMU Connection can be used to scan an
original according to the settings configured with "File Management Utility" (downloaded from Download Center,
and save the image data and scanning information on a specified server or folder. Unlike regular transmission
functions, this application lets you use metadata such as the scan date and time and the data format.
Triumph-Adler
https://www.triumph-adler.com/ta-en-de/customer-service/download-centre
https://www.triumph-adler.com/ta-de-de/kundendienst/download-center
UTAX
https://www.utax.com/en-de/hardware/office-printer-and-mfp/download-centre
https://www.utax.com/de-de/hardware/buerodrucker-und-mfp/download-center
1
Configure the settings.
The first time you use FMU Connection, you must start it up in System Menu.
➡ Activating Applications (page 222)
To use FMU Connection, you must install File Management Utility on your computer and configure the
multifunction machine to be used, scanning conditions, and the file save location. For installation of File
Management Utility, refer to the following:
➡ Installing Software (page 90)
NOTE
For information on using File Management Utility, refer to the following:
➡ File Management Utility User Guide
2
Make sure that File Management Utility is running on the computer (or server) on
which File Management Utility is installed.
3
Place the original.
4
Select [FMU Connection].
FMU Connection will start up.
5
Follow the on-screen instructions to enter the necessary information and select
[Next].
To Next Page
Loading...
