Kyocera 458ci - Replacing the Toner Container

Troubleshooting > Regular Maintenance
563
Replacing the Toner Container
When toner is empty, the following message will be displayed. Replace the toner container.
"Toner[C][M][Y][K]is empty."
When toner runs low, the following message will be displayed. Make sure you have a new toner container available
for replacement.
"Toner [C][M][Y][K] is low. (Replace when empty.)"
NOTE
• For the toner container, always use a genuine toner container. Using a toner container that is not genuine may
cause image defects and product failure.
• The memory chip in the toner container of this product stores information necessary for improving customer
convenience, operation of the recycling system for used toner containers, and planning and development of
new products. The stored information does not include information that makes it possible to identify
individuals, and is only used anonymously for the above purposes.
CAUTION
Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.
Installation procedures of the toner container is same for every color. Here, we'll explain the procedures for the
yellow toner container, as an example.
1
Open the Scanner Unit
The Toner Container Lock of the empty toner container is unlocked.