Kyocera 458ci - Sending Document to Desired Shared Folder on a Computer (Scan to PC)

Operation on the Machine > Sending Document to Desired Shared Folder on a Computer (Scan to PC)
233
Sending Document to Desired Shared Folder on a
Computer (Scan to PC)
You can store the scanned document into the desired shared folder on a computer.
NOTE
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
➡ Primary Network (Client) (page 485)
• Before sending the scanned document to the shared folder on your computer, you must configure the
following settings:
- Make a note of the computer name and full computer name
➡ Making a Note of the Computer Name and Full Computer Name (page 142)
- Make a note of the user name and domain name
➡ Making a Note of the User Name and Domain Name (page 143)
- Create a shared folder and make a note of the shared folder name
➡ Creating a Shared Folder, Making a Note of a Shared Folder (page 144)
- Configure the Windows firewall
➡ Configuring Windows Firewall (page 149)
1
[Home] key > [Send]
2
Place the original
➡ Loading Originals (page 208)
3
In the destination screen for sending, select [Enter destination] > [SMB]
4
Enter the destination information
To directly specify the SMB folder, select [Folder Path Entry] and enter each item.
NOTE
When selecting On for "Entry Check for New Dest.", the re-entering screen for the destination information
appears.
➡ Re-entering the New Destination (page 258)
The table below explains the items to be entered.