Operation on the Machine > Scanning using TWAIN or WIA
239
Scanning using TWAIN or WIA
This subsection explains how to scan an original using TWAIN. The WIA driver is used in the same way.
NOTE
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
➡ Primary Network (Client) (page 485)
• Before sending a document, confirm that TWAIN/WIA driver is installed on a computer and the settings are
configured.
➡ Setting TWAIN Driver (page 97)
➡ Setting WIA Driver (page 99)
1
Display the screen.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application and display the dialog box.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
2
Configure the settings.
Select scanning settings in the dialog box that opens.
NOTE
For the settings, refer to Help in the dialog box.
3
Place the original.
➡ Loading Originals (page 208)
4
Scan the originals.
Click the [Scan] button. The document data is scanned.
To Next Page
Loading...
