Kyocera 458ci - Interface Block Setting

System Menu > SecuritySettings
488
Interface Block Setting
[System Menu/Counter] key > [SecuritySettings] > "Interface Block Setting"
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or
optional interfaces.
Item Description
[USB HOST] This locks and protects the USB port (USB host).
Value: [Unblock], [Block]
[USB Device] This locks and protects the USB interface connector (USB Device).
Value: [Unblock], [Block]
[USB Drive] This locks and protects the USB memory slot.
Value: [Unblock], [Block]
NOTE
This function can be configured when the USB host is set to [Unblock].
[Optional Interface] This locks and protects the optional interface slots.
Value: [Unblock], [Block]
NOTE
This function can be set at each Option Interface.
[Restart Entire Device] Restart the machine without turning the power switch off.
IMPORTANT
Restart the Device or turn the power off and on to reflect the change in
the "Interface Block Setting".