Kyocera 458ci - FunctionSettings; Function Defaults

System Menu > FunctionSettings
434
FunctionSettings
Configures settings for copying, sending and Document Box functions.
Function Defaults
[System Menu/Counter] key > [FunctionSettings] > [Function Defaults]
[Common]
[System Menu/Counter] key > [FunctionSettings] > [Function Defaults] > [Common]
[Clear Settings after Job Started]
➡ Clear Settings after Job Started (page 423)
[File Name Entry]
Set an automatically entered name (default) for jobs. Additional information such as Date and Time and Job No.
can also be set.
Value
File Name: Up to 32 characters can be entered.
Additional information: [None], [Job No.], [Date and Time], [[Job No.] & [Date and Time]], [[Date and Time] & [Job
No.]]
[Border Erase Default]
Set the default width to be erased as a border.
Value
Metric
0 to 50 mm (in 1 mm increments)
Inch
0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in "Border". To specify border erase widths in the
middle of original, set the value in "Gutter".
[Zoom]
Select the enlarged/reduced default when paper size/sending size changed after the originals set.
Value: [100%], [Auto]
Item Description
[Border Erase to Back Page] Select the Border Erase Method for Back Page of a sheet.
Value: [Same as Front Page], [Do Not Erase]