Kyocera 458ci - Adding a User (Local User List)

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
509
Adding a User (Local User List)
You can add up to 1000 users (including the default login user name).
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Add/Edit Local User] from "User Login Setting".
2
Enter the user information.
[Add] > Add information on each item
User Name
*1
Enter the name displayed on the user list (up to 32 characters).
Login User Name
*1
Enter the login user name to login (up to 64 characters). The same login user name cannot be
registered.
Login Password
*1
Enter the password to login (up to 64 characters).
[Access Level Settings]
*1
Configure user privilege.
Access Level
Select [Administrator] or [User] for user access privileges.
System Administration Permissions
If the user privileges level set in Access Level is [User], select the items for which the user has setting
privileges from the following:
• Original/Paper Settings
• Address Book
• User/Job Account Information
• Basic Network Settings
• Basic Device Settings
• Advanced Device/Network Settings
[Account Name]
Add an account where the user belongs. The user, who registered his/her account name, can login
without entering the account ID.
➡ Overview of Job Accounting (page 535)