Operation on the Machine > Handling Destination
257
• Select (information icon) to check the destination.
• Select (edit icon) to modify the destination.
• Select (delete icon) to remove the destination from the list.
NOTE
• When selecting On for "Entry Check for New Dest.", the confirmation screen appears. Enter the same
destination again, and select [OK].
➡ Entry Check for New Dest. (page 440)
• If "Destination Check before Send" is set to On, the confirmation screen appears when the [Start] key is
pressed.
➡ Destination Check before Send (page 440)
➡ Confirmation Screen of Destinations (page 257)
Confirmation Screen of Destinations
When selecting On for "Destination Check before Send", the confirmation screen of destinations appears after
pressing the [Start] key.
➡ Destination Check before Send (page 440)
1
Move the screen to the bottom and confirm all destinations.
Selecting (information icon) shows the detailed information of the destination.
To delete the destination, select the destination you want to delete > [Delete] > [Delete]
To add the destination, select [Close] and then return to the destination screen.
2
Select [Check].
NOTE
Be sure to confirm all destination by displaying them on the touch panel. You cannot select [Check] unless
you have confirmed all destination.
To Next Page
Loading...
