Installing and Setting up the Machine > Embedded Web Server RX
107
Accessing Embedded Web Server RX
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[DeviceInformation] in the home screen > [Identification/Wired Network]
Example: https://10.180.81.1 (in the case of /IP address)
https://MFP001 (if the host name is MFP001)
The web page displays basic information about the machine and Embedded Web Server RX as well as
their current status.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed, configure the
certificate.
➡ Embedded Web Server RX User Guide
You can also continue the operation without configuring the certificate.
2
Configure the settings.
Select a category from the navigation bar on the left of the screen.
To Next Page
Loading...
