Troubleshooting > Adjustment/Maintenance
706
Color Registration Procedure
When first installing the machine or moving it to a new location, color drift during printing may occur. Use this
function to correct the color position of each of cyan, magenta and yellow to resolve color drift.
Auto registration and manual registration are available for Color Registration. Color drift can be largely corrected
through auto registration. However, if it is not resolved or to perform more detailed settings, use the manual
registration.
IMPORTANT
Before performing color registration, be sure to perform Calibration. If color drift remains, perform color
registration. By performing color registration without performing Calibration, the color drift will be resolved once,
however, it may cause the serious color drift later.
Auto Correction
1
Load paper.
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan out the paper before loading it in the cassettes.
➡ Precaution for Loading Paper (page 130)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause
paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration above).
• If paper is loaded without adjusting the paper length guide and paper width guide, the paper may skew
or become jammed.
2
Display the screen.
1 [System Menu/Counter] key > [Adjustment/Maintenance] > "Image Adjustment" [Color Registration -
Auto]
To Next Page
Loading...
