Installing and Setting up the Machine > Embedded Web Server RX
109
Changing Security Settings
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[DeviceInformation] in the home screen > [Identification/Wired Network]
3 Log in with administrator privileges.
4 Click [Security Settings].
2
Configure the settings.
From the [Security Settings] menu, select the setting you want to configure.
NOTE
For details on settings related to certificates, refer to the following:
➡ Embedded Web Server RX User Guide
To Next Page
Loading...
