Kyocera 458ci - Original Orientation

Using Various Functions > Functions
312
Original Orientation
[Org./Paper/Finishing]
[Org./SendData Format]
[Functions]
[Functions]
Select the orientation of the original document top edge to scan correct direction.
To use any of the following functions, the document's original orientation must be set.
• Zoom
• Duplex
• Border Erase, Border Erase/Full Scan
• Combine
• Duplex
NOTE
If On is selected in the setting for Original Orientation in System Menu, the selection screen for original orientation
appears when you select any of the above functions.
➡ Orientation Confirmation (page 423)
Select the orientation of the original from [Top Edge on Top], [Top Edge on Left] or [Auto].
[Top Edge on Top]
[Top Edge on Left]