Kyocera 458ci - Sending to different types of destinations (Multi sending); Sending to different types of destinations

Operation on the Machine > Sending to different types of destinations (Multi sending)
247
Sending to different types of destinations (Multi
sending)
You can specify destinations combining E-mail addresses, folders (SMB or FTP), and fax numbers. This is referred
to as Multi Sending. This is useful for sending to different types of destination (E-mail addresses, folders, etc.) in
a single operation.
No. of broadcast items: Up to 50
However, number of items are restricted for the following sending options.
• E-mail and fax: Up to 100 in total
• Folders (SMB, FTP): Total of 5 SMB and FTP
Also, depending on the settings, you can send and print at the same time.
Procedures are the same as used in specifying the destinations of respective types. Continue to enter E-mail
address or folder path so that they appear in the destination list. Press the [Start] key to start transmission to all
destinations at one time.
NOTE
• If the destinations include a fax, the images sent to all destinations will be black and white.
• If [Broadcast] is set to [Prohibit], multiple destinations cannot be entered.
➡ Broadcast (page 440)
Sending to different types of destinations
1
[Home] key > [Send]
2
Place the original.
3
Specify the recipient.
4
Configure the settings.
Select the Global Navigation to display other functions.
➡ Send (page 290)