User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
530
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in
advance to use this functionality.
NOTE
• For user registration, refer to the following:
➡ Adding a User (Local User List) (page 509)
• To use Simple Login, User Login Administration must be enabled in "User Login Setting".
➡ Enable User Login Administration (page 506)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
Enabling Simple Login
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Simple Login] from "User Login Setting".
2
Configure the settings.
1 Select [Off] or [On].
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Simple Login Key] from "User Login Setting".
2
Enter the user information.
1 Select the key to which you want to register a user.
To Next Page
Loading...
