User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
522
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE
To use the group authorization settings, [Network Authentication] must be selected for the authentication
method in "User Login Setting". In addition, set "LDAP" to ON in "Protocol Settings".
➡ Enable User Login Administration (page 506)
➡ Protocol Settings (page 473)
Group Authorization
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Group Authorization] from "User Login Setting".
2
Configure the settings.
1 Select [Off] or [On].
Group List (Up to 20)
Register the groups that are restricted the machine usage. Other users and groups belong to "Others".
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select [Group List] from [User Login Setting].
2
Configure the settings.
1 [Add] > add information on each item
Group Name
Enter the name displayed on the group list (up to 32 characters).
Group ID
*1
Enter the ID displayed on the group list (between 1 and 4294967295).
To Next Page
Loading...
