Kyocera 458ci - Optional Network

System Menu > NetworkSettings
481
Optional Network
[System Menu/Counter] key > [NetworkSettings] > "Optional Network"
Configure settings for the optional Network Interface Kit.
NOTE
This Menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Host Name
Check the host name of the machine. Host name can be changed from Embedded Web Server RX.
➡ Changing Device Information (page 110)
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function will be displayed when the optional Wireless Network Interface Kit (IB-51) is installed.
[Connection Status]
If you have the optional Wireless Network Interface Kit installed, you can check the status of your wireless LAN.
[Setup]
Item Description
[Available Network] Select access points to which the machine can be connected, enter the
Preshared Key and start a connection.
[Push Button Method] If the access point supports the push button method, wireless settings
can be configured using the push button. This setting executes push
button, and the connection is started by pressing the push button on the
access point.
NOTE
The push button method supports only the WPS.
[PIN Code Method (Device)] Starts connection using the machine's PIN code. Enter the PIN code into
the access point. The PIN code of the machine is automatically
generated.
[PIN Code Method (Terminal)] Starts connection using the access point’s PIN code. Enter the PIN code
of the access point.
[Custom Setup] The detailed settings for wireless LAN can be changed.