Operation on the Machine > Using Document Boxes
272
Printing Document in a Custom Box
1
Display the screen.
1 [Home] key > [Custom Box]
2 Select the box containing the document you want to print.
NOTE
If a custom box is protected by a password, enter the correct password.
2
Print.
1 Select the document in the list that you want to print by selecting the checkbox.
The document is marked with a checkmark.
NOTE
To deselect, select the checkbox again and remove the checkmark.
2 Select [Print].
3 Set the paper selection, duplex printing, etc., as desired.
For the features that can be set, refer to the following:
➡ Custom Box (Store File) (page 295)
➡ Custom Box (Print) (page 297)
➡ Custom Box (Send) (page 298)
NOTE
Select [Favorites] when registering or calling up favorites.
➡ Register Favorites (Wizard Mode) (page 216)
➡ Recalling Favorites (Program Mode) (page 218)
If a document stored from a computer is selected, the print settings selection screen appears.
To use the settings used at the time of printing (when the document was saved), select [Print As Is]. Select
[Start Print] to start printing.
If you need to change the print settings, select [Print after Change Settings (Use File Settings)] or [Print
after Change Settings (Do Not Use File Settings)].
After a document saved in the machine is selected, [Use File Settings] key may appear in the setting
screen for the feature to be used.
To use the settings saved with the document, select [Use File Settings].
If you need to change the print settings, select the desired feature.
4 Press the [Start] key.
Printing of the selected document begins.
To Next Page
Loading...
