Using Various Functions > About Functions Available on the Machine
295
Custom Box (Store File)
For details on each function, see the table below.
[Functions]
Configure the settings when storing the document in the Custom Box.
Function Description
[Original Size] Specify the original size to be scanned.
➡ Original Size (page 305)
[Mixed Size Originals] Scan the documents of different sizes that are set in the document
processor all at once.
➡ Mixed Size Originals (page 309)
[Duplex] Select the type and orientation of the binding based on the
original.
➡ Duplex (page 353)
[Original Orientation] Select the orientation of the original document top edge to scan
correct direction.
➡ Original Orientation (page 312)
[Storing Size] Select size of image to be stored.
➡ Storing Size (page 375)
[Prevent Bleed-thru] Hides background colors and image bleed-through when scanning
thin originals.
➡ Prevent Bleed-thru (page 328)
[Density] Adjust density.
➡ Density (page 316)
[Original Image] Select original image type for best results.
➡ Original Image (page 317)
[Scan Resolution] Select fineness of scanning resolution.
➡ Scan Resolution, Resolution (page 367)
[Color Selection] Select the color setting.
➡ Color Selection (page 321)
[Erase Colors] Erases colors in the source document.
➡ Erase Colors (page 330)
[Sharpness] Adjusts the sharpness of image outlines.
➡ Sharpness (page 325)
[Background Density Adj.] Removes dark background from originals, such as newspapers.
➡ Background Density Adj. (page 326)
[Zoom] Adjust the zoom to reduce or enlarge the image.
➡ Printing/Sending/Storing (page 332)
To Next Page
Loading...
