System Menu > FunctionSettings
435
[DP Read Action]
Set the operation when a document is scanned from the document processor.
Value: [Speed Priority], [Quality Priority]
[Detect Multi-fed Originals]
When scanning a document from the document processor, scanning is automatically stopped when multi fed
originals is detected.
This function is available only for 458ci.
[Detect Folded Corner Originals]
[Quiet Mode]
Value Description
On In case of detecting that multiple sheets of original are fed at the same
time, the message is displayed and stop scanning the original.
Off It does not detect.
Value Description
On When scanning a document from the document processor, scanning is
automatically stopped when a document with a folded corner is
detected.
Off It does not detect.
Value Description
[Quiet Mode] Set the quiet mode. Select this mode when the running noise is
uncomfortable.
Value: Off, On
[Specify Each Job] You can set the quiet mode for each job, such as copy and send. Here,
set whether to allow the setting for each job.
Value: [Permit], [Prohibit]
To Next Page
Loading...
