Preparation before Use > Load Paper
134
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan out the paper before loading it in the cassettes.
➡ Precaution for Loading Paper (page 130)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may
cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration above).
• If paper is loaded without adjusting the paper length guide and paper width guide, the paper may
skew or become jammed.
4
Gently push the cassette back in.
NOTE
There is a paper gauge on the right side of the front of the cassette. The display changes up and down to
match the remaining amount of paper.
5
Specify the type of paper loaded in the cassette using the operation panel.
➡ Specifying Paper Size and Media Type (page 138)
To Next Page
Loading...
