System Menu > DeviceSettings
420
[Paper Feed Settings]
[System Menu/Counter] key > [DeviceSettings] > [Paper Feeding] > [Paper Feed Settings]
[Default Paper Source]
Select the default paper source.
Value: [Cassette 1] to [Cassette 5], [MP Tray]
NOTE
[Cassette 2] to [Cassette 5] are displayed when the following optional paper feeder is installed.
[Cassette 2]: Paper Feeder (550-sheet)
[Cassette 3]: Paper Feeder (550-sheet)
[Cassette 4]: Paper Feeder (550-sheet)
[Cassette 5]: Paper Feeder (550-sheet)
[Paper Selection]
Set the default paper selection.
Value: [Auto], [Default Paper Source]
[Auto Paper Selection]
If [Auto] is selected for Paper Selection, set the paper size selection method for when the zoom changes.
Value
[Most Suitable Size]: Selects optimum paper size based on the current zoom level and the size of the original.
[Same as Original Size]: Selects paper that matches the size of the original, regardless of the zoom level.
[Media for Auto (Color)]/[Media for Auto (B & W)]
When Auto is selected for Paper Selection, you can limit the paper that is automatically selected by paper type. For
example, if [Plain] is selected, the paper source with plain paper loaded in the specified size is selected. Select [All
Media Types] for the paper source with any kind of paper loaded in the specified size.
[All Media Types], [Plain], [Transparency], [Vellum], [Labels], [Recycled], [Preprinted], [Bond], [Cardstock], [Color],
[Prepunched], [Letterhead], [Envelope], [Thick], [Coated], [High Quality], [Custom 1] to [Custom 8]
[Special Paper Action]
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or the print direction
might be upside-down due to a combination of copying functions and the way originals are set. In such a case,
select [Adjust Print Direction] to adjust the print direction. When paper orientation is not important, select [Speed
Priority].
If [Adjust Print Direction] is selected, load paper according to the steps below.
Example: copying on Letterhead
To Next Page
Loading...
