System Menu > NetworkSettings
464
NOTE
The push button method supports only the WPS.
[PIN Code Method (Device)]
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The PIN code of the
machine is automatically generated.
[Custom Setup]
The detailed settings for wireless LAN can be changed.
Item Description
[Network Name (SSID)] Set the SSID (Service Set Identifier) of the wireless LAN to which the
machine connects.
NOTE
Up to 32 characters can be entered.
[Network Authentication] Select network authentication type.
Value: [Open], [WPA2/WPA-PSK], [WPA2-PSK], [WPA2/WPA-EAP],
[WPA2-EAP], [WPA3-SAE/WPA2-PSK], [WPA3-SAE], [WPA3/WPA2-EAP],
[WPA3-EAP]
To Next Page
Loading...
