System Menu > NetworkSettings
477
[Enhanced WSD over TLS]
[eSCL]
[eSCL over TLS]
[VNC (RFB)]
Item Description
[Protocol Settings]
Set whether to use our proprietary Web service on TLS.
*1*2
Value: Off, On
NOTE
If you select [Off], the WIA driver, TWAIN driver, and Network FAX driver
are not available.
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Protocol Settings]
Sets whether to receive scanned documents using eSCL.
*1
Value: Off, On
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Protocol Settings] Sets whether to receive scanned documents using TLS-protected eSCL.
Value: Off, On
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Protocol Settings] Set when using a remote operation by starting up a VNC Viewer other
than ours (example: Real VNC). The default port number is 9062.
*1
Value: [Off], [On], 1 to 32767 (Port Number)
[Available Network] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
To Next Page
Loading...
