System Menu > SecuritySettings
491
[Data Security]
[System Menu/Counter] key > [SecuritySettings] > "Device Security Settings" [Data Security]
Configure settings related to data stored in SSD or memory.
[SSD Initialization]
Change the security feature settings.
NOTE
• This feature appears when an optional SSD is installed and the optional security kit is running.
• To change security feature settings, you must enter a security password. The factory default value is 000000.
[Data Sanitization]
This function returns the following information stored in the machine to the factory default.
• Address Book
• Favorite Data
• System Settings
• Fax Send/Receive/Transfer Data
• Outgoing and Incoming Fax Log
• Local Fax Station Name
Item Description
[Security Password] Customize the security password so that only the administrator can use
the Data Encryption/Overwrite.
Enter a new security password 6 to 16 alphanumeric characters and
symbols.
Enter the password again for confirmation.
IMPORTANT
Avoid any easy-to-guess numbers for the security password (e.g.
11111111 or 12345678).
[System Initialization] You can completely erase the contents of the SSD. Do so when you want
to stop using the machine.
IMPORTANT
If the power switch is turned off during initialization, the SSD may be
damaged and the initialization may not complete.
NOTE
If you accidentally turn the power switch off during initialization, turn the
power switch on again. Initialization automatically restarts.
To Next Page
Loading...
