Troubleshooting > Troubleshooting
571
Machine does not print even when [Start] is pressed
Is there a message displayed on the screen?
If a message is displayed on the screen, you may not be able to operate it depending on what is displayed.
Determine the appropriate response to the message and respond accordingly.
Is the machine in Sleep mode?
Operation can’t be done when it is in sleep mode.
1
Press any key on the control panel
NOTE
It’s possible to return from sleep mode by the following method:
• Touch the touch panel
• Loading Originals in the document processor
• Open the document processor
To Next Page
Loading...
