Troubleshooting > Troubleshooting
582
Two or more sheets are overlaps when ejected (multi feeding)
Is the paper loaded correctly?
Load the paper correctly.
When loading paper in a cassette
1
Pull the cassette completely out of the machine.
NOTE
When pulling the cassette out of the machine, ensure it is supported and does not fall out.
2
Adjust the cassette size.
1 Adjust the position of the paper width guides located on the left and right sides of the cassette. Press the
paper width adjusting tab and slide the guides to the paper size required.
Paper sizes are marked on the cassette.
To Next Page
Loading...
