Kyocera 458ci - Page 85

Installing and Setting up the Machine > Default Settings of the Machine
75
TCP/IP (IPv4) setting
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this setting. If you
do not know your login user name or password, please contact your administrator.
1
Display the screen.
[System Menu/Counter] key > [NetworkSettings] [Wired Network Settings] > "TCP/IP Settings" [IPv4
Settings]
2
Configure the settings.
• When using DHCP server
- [DHCP]: On
• When setting the static IP address
- [DHCP]: Off
- [Auto-IP]: Off
- [IP Address]: Enter the address.
- [Subnet Mask]: Enter the subnet mask in decimal representation (0 to 255).
- [Default Gateway]: Enter the address.
• When using the Auto-IP
Enter "0.0.0.0" in IP Address.
• When setting the DNS server
In the following cases, set the IP address of DNS (Domain Name System) server.
- When using the host name with [DHCP] setting set to Off.
- When using the DNS server with IP address that is not assigned by DHCP automatically.
Select [Use DNS Server from DHCP] or [Use the following DNS Server]. If you selected [Use the following DNS
Server], enter the [DNS Server (Primary)] and [DNS Server (Secondary)].
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the machine OFF and then ON.
➡ Restart the network (page 480)
NOTE
Ask your network administrator for the IP address in advance, and have it ready when you configure this
setting.