Installing and Setting up the Machine > Default Settings of the Machine
82
Setting Wi-Fi Direct
When the Optional Wireless Network Interface Kit (IB-37/IB-38) is installed on the machine and the connection
settings are configured, this enables you to print from the Wi-Fi Direct environment. The configuration methods
are as follows:
• Configuring the connection from the operation panel on this machine
• Configuring the connection by using push button
Connecting to Computers or Mobile Devices that Support Wi-Fi Direct
1
Display the screen.
[System Menu/Counter] key > [NetworkSettings] > "Network Settings" [Wi-Fi Direct Settings]
2
Configure the settings.
"Wi-Fi Direct": On > [OK]
3
Restart the network.
[System Menu/Counter] key > [NetworkSettings] > "Network Settings" [Restart Network] > [Restart]
4
Specify the machine name from the computer or mobile device.
If a confirmation message appears on the operation panel of the machine, select [Yes].
The network between this machine and the computer or mobile device is configured.
To Next Page
Loading...
