5-29
Detailed Settings of FAX Functions > Polling Communication
4
Press the [Start] key.
The operations for reception begin.
Using Polling Reception with Sub Addresses
For polling reception, enter the sub address (on this machine, sub address and sub address password) set at the
sending machine. This communication is still possible when the other party is using a third-party machine provided it is
equipped with the same type of sub address communication function.
1
Select [FAX] on the Home screen.
2
Turn on polling reception.
To turn on polling reception, refer to the following:
Performing Polling Reception (5-28)
3
Select the destination, and entering the sub address.
For the procedure for setting a sub address, refer to the following:
Perform sub address transmission (5-24)
For the procedure for selecting a destination, refer to the following:
Methods For Entering the Destination (3-6)
4
Press the [Start] key.
The operations for reception begin.
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is displayed when you
press the [Start] key.
Displaying the Confirmation Screen of Destinations (7-10)
Check the sub address set by the sender beforehand.
You can select destinations using a combination of numeric keys input, One Touch Key selection and selection
from the Address Book containing registered sub addresses.
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is displayed when you
press the [Start] key.
Displaying the Confirmation Screen of Destinations (7-10)
To Next Page
Loading...
