3-14
Fax transmission > Standby Transmission
Standby Transmission
During a communication, you can scan originals and schedule a next transmission. When the first communication is
completed, the machine automatically starts the scheduled next transmission. When using standby transmission, you do
not need to wait when a communication has prolonged due to broadcast transmission.
1
Select [FAX] on the Home screen.
2
Place the originals.
3
Select the destination, and set transmitting functions if you want to use any.
4
Press the [Start] key.
Scanning of the originals starts, and the next transmission is scheduled.
5
When the communication is completed, the scheduled transmission will begin.
Together with delayed transmission and interrupt send, up to 35 transmissions can be scheduled.
You can use the broadcast transmission function.
When [On] is selected in [Dest. Check before Send], a destination confirmation screen is displayed when you
press the [Start] key.
Displaying the Confirmation Screen of Destinations (7-10)
To Next Page
Loading...
