6-17
Sending Faxes from PC > Changing Transmission Settings
2
Enter the sub-address and password as it is registered in the destination fax.
• Maximum number of characters that can be entered: 20 characters
• Characters that can be entered: 0 to 9, #, *, space (a space CANNOT be entered as the first character)
3
Click on the [OK] button.
The [Transmit Settings] dialog box will be displayed once again.
Specify a cover page
A Cover Page can be set as the first page of a fax transmission. In addition to the standard templates for Cover Pages,
original templates can be created and used.
To attach and transmit a Cover Page, place a check in the check box for [Attach Cover Page] in the [Cover Page] tab.
For information regarding how to use Cover Pages, refer to the following:
Using Cover Pages (6-19)
Setting Options
The settings that were selected in “(1) Sending Options Tab” can be changed by clicking the [Options] tab.
For the setting procedures, refer to the following:
(1) Sending Options Tab (6-9)
To Next Page
Loading...
