Kyocera ECOSYS M8130cidn - Register Reject FAX numbers.

8-16
Default Setting of FAX [System Menu] > Transmission Restriction
Register Reject FAX numbers.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Reject No. List]
2
Add a Reject FAX No.
1 Select [ ].
2 Use the numeric keys to enter Reject FAX No. Up to 20 digits can be entered.
3 Select [OK].
3
To register another Reject FAX No., repeat Steps 2-1 to 2-3.
Changing Reject FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Reject No. List]
2
To edit.
1 Select [ ] for Permit FAX No. you want to change, and enter the new number.
2 Enter the new number.
3 [OK] > [Yes]
The registration is changed.
Deleting Reject FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Reject No. List]
2
To delete.
1 Select Reject FAX No. you want to delete, and select [ ].
NOTE
Up to 25 Reject FAX numbers can be registered.
NOTE
Select [Pause] to insert a pause (-) between numbers.
Select [Space] to enter a space.
Use [<] or [>] to move the cursor.
Selecting [Backspace] deletes the character to the left of the cursor.
NOTE
For the procedure for entering a number, refer to the following:
Register Reject FAX numbers. (8-16)