vi
> Menu Map
Menu Map
[FAX]
or
Function key Description Reference Page
On Hook Select to send and receive faxes
manually.
3-13
Direct Sends FAX directly without reading
original data into memory.
3-13
Recall Destination When you want to send the fax to the
same receiving system, select [Recall],
and you can call the receiving system
you dialed on the destination list.
3-3
Add Dest. Enter the other party number using the
numeric keypad.
3-6
Address Book Select a destination registered in the
Address Book.
3-7
External Address Book Select a destination registered in the
external address book.
Command Center RX
User Guide
One Touch Key Select the destination using the One
Touch Keys.
3-8
Function Description Reference Page
Original Size Specify the original size to be scanned. 5-3
Original Orientation Select the orientation of the original
document top edge to scan correct
direction.
5-3
2-sided/Book Original Select the type and binding of originals. 5-4
FAX TX Resolution Select fineness of images when sending
FAX.
5-4
Density Adjust density using 9 levels. 5-4
Original Image Select original image type for best
results.
5-5
Continuous Scan Scans a large number of originals in
separate batches and then produce as
one job.
5-5
File Name Entry Adds a file name. 5-5
Long Original Reads long-sized original documents
using a document processor.
5-5
Job Finish Notice Sends E-mail notice when a job is
complete.
5-5
To Next Page
Loading...
