Kyocera ECOSYS M8130cidn - Fax Setup Items

2-8
Before Using the Fax Machine > Quick Setup Wizard
Fax setup items
* Inch version only.
** DRD reception mode is available for some countries.
*** This setting does not appear in some regions.
**** This function is displayed when the optional Job Separator, Mailbox or Sheet Finisher is installed.
Step Setting item Description Reference
Page
1.Dialing/RX Mode Dialing Mode Select the dialing mode according to the line type. 8-9
Reception Mode Select the reception mode. 8-11
Auto (DRD)** Select the reception pattern.
2.Local Fax Info. Local FAX Name Register the local fax name printed on the fax on the
receiving system.
8-9
Local FAX Number Enter the local fax number to be printed on the fax on the
receiving system.
8-9
Local FAX ID Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the four-
digit local FAX ID number.
8-9
TTI Select whether or not to print the local fax information on
the fax on the receiving system.
8-9
3.Sound Speaker Volume Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when the
line is connected by selecting [On Hook].
8-7
Monitor Volume Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the
line is connected without selecting [On Hook] such as in
memory transmission.
8-7
Job Finish Buzzer Emit a sound when a print job is normally completed.Emit
a sound when a job is normally completed.
8-7
4.Rings Normal Set number of times to let phone ring before answering a
call.
8-11
Answering Machine*** Set number of times to let phone ring before taking over
from the answering machine.
8-11
FAX/TEL Switch*** Set number of times to let phone ring before switching the
FAX and the phone.
8-11
5.Output Paper Output Select paper output for the received FAX. 8-7
Reduced RX Size When the reception size is larger than the paper size, you
can reduce the print size.
8-10
6.Redial Retry Times Set the number of redials. 8-9
NOTE
The settings can be changed in the system menu.
System Menu Operation Method (8-2)