Kyocera ECOSYS M8130cidn - Registering Permit FAX no

8-17
Default Setting of FAX [System Menu] > Transmission Restriction
2 Select [Yes].
The registration is deleted.
Registering Permit FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit ID List]
2
Add a Permit ID No.
1 Select [ ].
2 Use [+]/[-] or the numeric keys to enter Permit ID No. (0000 to 9999).
3 Select [OK].
3
To register another Permit ID No., repeat Steps 2-1 to 2-3.
Changing Permit ID No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit ID List]
2
Edit the fax number.
1 Select [ ] for Permit ID No. you want to change.
2 Enter the new number.
3 [OK] > [Yes]
The registration is changed.
Deleting Permit ID No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit ID List]
2
Delete the fax number.
1 Select Permit ID No. you want to delete, and select [ ].
2 Select [Yes].
The registration is deleted.
NOTE
Up to 10 Permit ID numbers can be registered.
NOTE
For the procedure for entering a number, refer to the following:
Registering Permit FAX No. (8-17)