Kyocera ECOSYS M8130cidn - Register Permitted FAX No.

8-14
Default Setting of FAX [System Menu] > Transmission Restriction
*1 If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local FAX Numbers (Indicates
local FAX information entries, not the actual line numbers.) are not registered.
Register Permitted FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit No. List]
2
Add a permit fax number.
1 Select [ ].
2 Use the numeric keys to enter Permit FAX No. Up to 20 digits can be entered.
3 Select [OK].
3
To register another permit fax number, repeat Steps 2-1 to 2-3.
Prerequisites Reception Rejection Requirements
Reception Rejection • Register Reject FAX numbers.
* 1
Register Reject FAX numbers. (8-16)
• Reception restriction settings are specified
in [Reject List] in Reception Restrictions.
Setting Reception Restriction (8-18)
• The sender’s Local FAX Number is not
registered.
• The sender’s Local Fax Number matches
a Reject FAX No. registered on the
machine.
NOTE
Up to 25 Permit FAX numbers can be registered.
NOTE
Select [Pause] to insert a pause (-) between numbers.
Select [Space] to enter a space.
Use [<] or [>] to move the cursor.
Selecting [Backspace] deletes the character to the left of the cursor.