Kyocera ECOSYS M8130cidn - Changing Permit FAX no

8-15
Default Setting of FAX [System Menu] > Transmission Restriction
Changing Permit FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit No. List]
2
To edit.
1 Select [ ] for Permit FAX No. you want to change, and enter the new number.
2 [OK] > [Yes]
The registration is changed.
Deleting Permit FAX No.
1
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit No. List]
2
To delete.
1 Select Permit FAX No. you want to delete, and select [ ].
2 Select [Yes].
The registration is deleted.
NOTE
For the procedure for entering a number, refer to the following:
Register Permitted FAX No. (8-14)