Kyocera ECOSYS M8130cidn - Logging in When Job Accounting Has Been Enabled

3-12
Fax transmission > Login/Logout
Logout
To logout from the machine, select the [Authentication/Logout] key to return to the login user name/login password
entry screen.
Logging in when Job Accounting has been Enabled
When job accounting has been enabled, you need to enter an Account ID when using the machine.
Login
1
Enter the account ID using the numeric keys and select [Login].
When the screen to enter the login user name and password appears
If user login administration is enabled, the screen to enter the login user name and password appears. Enter a
login user name and password to login. If the user has already registered the account information, the account ID
entry would be skipped.
Machine’s Operation Guide
2
Proceed to complete the rest of the steps.
Logout
When the operations are complete, select the [Authentication/Logout] key to return to the account ID entry screen.
NOTE
• If you entered a wrong character, select the [Clear] key and enter the account ID again.
• If the entered account ID does not match the registered ID, a warning beep will sound and login will fail. Enter
the correct account ID.
• By selecting [Check Counter], you can refer to the number of pages printed and the number of pages
scanned.
Autentication/
Logout