Kyocera ECOSYS M8130cidn - Displaying the Confirmation Screen of Destinations

7-10
Job Control > Displaying the Confirmation Screen of Destinations
Displaying the Confirmation Screen of
Destinations
If address verification before sending is set to [On], the address verification screen showing the address appears when
the [Start] key is pressed.
Machine’s Operation Guide
Follow the steps below to confirm the destinations.
1
Check all destinations.
Select [ ] or [ ] to confirm every destination. Select [ ] to display the detailed information on the selected
destination.
2
Change a destination.
Delete a destination
1 To delete the destination, select the destination you want to delete and select [ ].
2 Select [Yes].
The destination is deleted.
Add a destination
To add the destination, select [Cancel] and then return to the destination screen.
3
Select [Check].
When you have finished checking all destinations, select [Check].
4
Press the [Start] key.
Start sending.
NOTE
Be sure to confirm every destination by displaying them on the touch panel. You cannot select [Check] unless
you have confirmed every destination.