5-3
Detailed Settings of FAX Functions > Fax transmission functions
Fax transmission functions
[Original Size]
Specify the original size to be scanned.
*1 Set [Custom Original Size]. Refer to the machine’s Operation Guide. If [Custom Original Size] is set to [Off], the item is not
displayed.
[Original Orientation]
Select the orientation of the original document top edge to scan correct direction. To use any of the following functions,
the document's original orientation must be set.
Select original orientation from [Top Edge on Top], [Top Edge on Left] or [Auto].
Auto Detects the original automatically.
Metric Select from A3, A4, A4-R, A5, A5-R, A6, B4, B5, B5-R, B6, B6-R, Folio, and 216 x 340 mm.
Inch Select from Ledger, Letter, Letter-R, Legal, Statement, Statement-R, 11 x 15”, and Oficio II.
Others Select from 8K, 16K, 16K-R, Cardstock, Oufuku hagaki (Return postcard), and custom
*1.
Size Entry Enter the paper size.
Centimeter - Horizontal 50 to 432mm (1 mm unit), Vertical 50 to 297mm (1 mm unit)
Inch - Horizontal 2 to 17” (0.01” unit), Vertical 2 to 11. 69”(0.01” unit)
Be sure to always specify the original size when using custom size originals.
Setting item Image
Top Edge on Top
Original Original orientation
Top Edge on Left
Original Original orientation
To Next Page
Loading...
