Kyocera ECOSYS M8130cidn - Unusable Time

8-19
Default Setting of FAX [System Menu] > Unusable Time
Unusable Time
This feature sets a time period during which the machine will not print received faxes.
1
Display the screen.
[System Menu/Counter] key > [Date/Timer/Energy Saver] > [Unusable Time]
2
Configure the settings.
Set the unusable time
1 [On] > [Unusable Time]
2 Enter the start time.
3 Select [Next].
4 Enter the end time.
5 [OK] > [OK]
Set the cancel code
Specify the code to temporarily cancel the unusable setting during unusable time.
1 Select [Unlock code].
2 Enter Unlock Code (0000 to 9999).
3 [OK] > [OK]
IMPORTANT
When Unusable Time is set, in addition to fax printing, all other printing operations are prohibited
during the unusable time period, including printing of copy jobs and printer jobs, and printing from USB
memory.
Faxes and print jobs received during the unusable time period are printed after the unusable time
period ends, or when the unusable time period is temporarily canceled.
NOTE
If the login user name entry screen appears during operations, log in by referring to the machine's Operation
Guide for Administrator User Name and Password.
The factory default login user name and login password are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
ECOSYS M8124cidn:2400, ECOSYS M8130cidn:3000
NOTE
If the same time is set as the start time and end time, you cannot use all day.
NOTE
To use the machine temporarily during unusable time, enter the Unlock Code and select [Login].