6-20
Sending Faxes from PC > Using Cover Pages
1
Open the Transmit Settings dialog box.
Perform Steps 1 to 6 of the Basic Transmission method to display the Transmit Settings dialog box.
Configuring the Driver Default Settings (6-7)
When selecting the destination from an Address Book, refer to “(1) Selecting a Destination from the Address
Book”, select the destination, and go to Step 4.
Selecting Destination from the Address Book (6-15)
2
Enter the fax number.
In the [Address Setting] tab, enter the destination fax number and click on the [Option Settings] button.
3
Enter the recipient information.
When finished, click the [OK] button.
4
Add the destination to the destination list.
1 Add this information to the [Destination List] by clicking on the [Add to Destination List] button.
Item Description
FAX Number A maximum of 64 characters can be entered.
Item Description
Company A maximum of 32 characters can be entered.
Department A maximum of 32 characters can be entered.
Recipient A maximum of 32 characters can be entered.
When [Attach Cover Page] of the [Cover Page] Tab is not set, the Cover Page Confirmation screen will be
displayed. To include a cover page, click on [Attach Cover Page] button.
To Next Page
Loading...
