8-21
Default Setting of FAX [System Menu] > Account Management
Communication modes subject to job accounting
• Normal transmission
• Delayed transmission
• Broadcast Transmission
• Sub address transmission
• Encrypted Transmission
• Manual send when dialed from this machine to the receiving system
• Polling Reception
• Sending Network FAX
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the following operations.
• Normal transmission
• Delayed transmission
• Broadcast Transmission
• Sub address transmission
• Printing Originals from a Sub Address Box
• Encrypted Transmission
• Manual send when dialed from this machine to the receiving system
• Polling Reception
• Sending Network FAX
When job accounting has been enabled, batch transmission function works only for communication to be performed for
the same Account ID. The communication to be performed with a different Account ID is not conducted as a batch
transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job accounting is
enabled and an Account ID is entered when a fax is sent, you can enable a setting to have the Account Name or Local
FAX Name, whichever was selected, be printed.
Account as Local FAX Name (8-9)
You can use ‘Make a call’, ‘Checking FAX Job History’ and ‘Communication Control Report Output’
functions without entering an Account ID or Administrator No.
To Next Page
Loading...
