3-5
Fax transmission > Basic transmission procedure
1
Select the [Status/Job Cancel] key.
2
Disconnection of communication.
[FAX] > [Line Off] > [Yes]
When communication is disconnected, sending stops.
To cancel direct transmission, refer to the following:
Cancelling Direct Transmission (5-7)
To cancel a delayed transmission or send a fax by immediate transmission, refer to the following:
Cancelling Delayed Transmissions (Queued) (5-7)
To cancel polling transmission, refer to the following:
Polling Communication (5-26)
To cancel direct transmission, delayed transmission, or polling transmission, refer to the section for that
function.
To Next Page
Loading...
