2-6
Daily Management and Maintenance > Improving and maintaining of print quality
3
Select [1st Side ] or [2nd Side]
[1st Side] corresponds to the front side for single-sided or double-sided printing. [2nd Side]
corresponds to the back side for duplex printing.
4
Press [System Menu/Counter] key
The screen for configuring the feeder (paper source), paper size, duplex printing, color/
monochrome, number of copies, and paper output is appears. Configure the items as
necessary.
5
Press [Start] key
A chart is printed.
When printing on one side, the page printed with "A" on the chart will be the first side.
When printing on both sides, the page printed with "B" on the chart is the first side, and the
page printed with "A" is the second side.
Full(SRA3/12x18) Select this item under the following conditions.
Paper size: SRA3 or 12 "x 18"
Printer driver setting: duplex print
Half Select this item under the following conditions.
Paper type: inkjet matte paper
Printer driver setting (When one of the following is
selected):
• Print resolution: Fine 1200 dpi or Fast 1200 dpi
• Print Quality: High quality
• Lin Thinning: Barcodes
Configure the settings to match the conditions of print speed selected in step 2. For
example, when selecting [Full(Shift)] or [Full], be sure to select the machine or
optional MP Tray as the feeder. If there is a mismatch in settings, the start position
can not be adjusted correctly.
Item Contents
To Next Page
Loading...
