dV-DOSC dV-SUB Manual V3.0 June 2005 21
1.1 dV-DOSC SYSTEM COMPONENTS
LOUDSPEAKER ENCLOSURES
dV-DOSC
Active 2-way loudspeaker enclosure, meeting Wavefront Sculpture Technology criteria, with coplanar
symmetric arrangement of loudspeaker components
FLIGHT-dV
Flight case for transport of three dV-DOSC enclosures
dV-DOSC
FLIGHT-dV
FLIGHT-dV
Figure 7: dV-DOSC plus accessories
RIGGING ACCESSORIES
dV-BUMP
Bumper for rigging dV-DOSC and/or dV-SUB. When combined with V-DOSC BUMP2 (see V-DOSC
manual for details), can be used for stacking dV-DOSC on top of V-DOSC (for upfill) or for stacking
dV-DOSC standalone
dV-BUMP2
Alternative bumper for rigging dV-DOSC and/or dV-SUB. dV-DOSC can also be stacked on top of dV-
BUMP2 with dV-SUB and dV-DOSC flown underneath
dV-DOWN
Pair of rigging adapters for installing dV-DOSC underneath V-DOSC for downfill applications
dV-PIN25
Locking quick release pin (25 mm grip length) for physically connecting dV-DOSC or dV-SUB
enclosures. Six dV-PIN25 and 2 dV-ANGLE (P1 or P2) bars are required per 2 dV-DOSC enclosures.
dV-PIN 81
Locking quick release pin (81 mm grip length) for connecting dV-DOSC to dV-DOWN
To Next Page
Loading...
