L-Acoustics dV-SUB User Manual

dV-DOSC dV-SUB Manual V3.0 June 2005 25
AMPLIFIER RACKS
RK12U
12 rack unit amplifier rack (empty). Light-weight aluminum space frame construction, internal shock
mounting, standard rack rails, provision for rear support of amplifiers, transparent lexan doors that
store inside the rack, high impact resistance polyethylene cover (no external case required). Recessed
Aeroquip flytrack sections for flown applications.
RK122a
RK12U supplied with PADO2a amp panel, PADOSEC, 2U drawer, 2U blank panel, rear support kit
for 2 L-ACOUSTICS LA power amplifiers (power amplifiers not included).
RK124a
RK12U supplied with PADO4a amp panel, PADOSEC, rear support kit for 4 L-ACOUSTICS LA
power amplifiers (power amplifiers not included).
PADO2a AMP PANEL
Amplifier panel supplied with RK122a suitable for 2 amplifier rack configuration. Single 8 pin female
CA-COM connector for loudspeaker connection (in parallel with 4x NL4 Speakon connectors), two
male 19 pin CA-COM connectors for signal distribution (input/through), COMB connector (for
selecting 2-way, 3-way or subwoofer operating modes); 4x male XLR and 4x Speakon fanouts on the
internal side (for connecting to amplifier inputs and outputs).
Note: PADO stands for PA
TCH DOSC
PADO4a AMP PANEL
Amplifier panel supplied with RK124a suitable for 4 amplifier rack configuration. Two 8 pin female
CA-COM connectors for loudspeaker connection, two male 19 pin CA-COM connectors for signal
distribution (input/through), 2x COMB connectors (for selecting 2-way, 3-way or subwoofer
operating modes); 2 pairs of 4x male XLR and 4x Speakon fanouts on the internal side (for connecting
to amplifier inputs and outputs).
COMB CONNECTOR
Routes desired input lines from the male 19 pin CA-COM connector to the appropriate amplifier
inputs allowing RK122a or RK124a amplifier racks to be configured in 2-way (dV-DOSC, ARCS), 3-
way (V-DOSC, KUDO) or subwoofer (SB218) operating modes (COMB connectors: D2WAY,
D3WAY and DSUB, respectively). Additional COMB connectors are available for use with 2- or 3-way
format systems (D2WA, D2WB, D2WSTEREO, D3WA, D3WB, DSUBA, DSUBB) and a COMB
connector kit for subwoofer array signal processing or for powering passive enclosures (DSUBTK).
PADOSEC
Mains distribution panel, 32 amp connector, 5x AC receptacles

L-Acoustics dV-SUB Specifications

General

Brand	L-Acoustics
Model	dV-SUB
Category	Stereo System
Language	English