dV-DOSC dV-SUB Manual V3.0 June 2005 98
(i) Place V-DOSC bumper into position
(ii) dV-BUMP locator studs mate with holes
(iii) dV-BUMP mounted inside V-DOSC BUMP
(iv) Insert locator pin
(v) Use dV-PIN81 to secure locator pin
(vi) Overview of dV-BUMP secured to V-DOSC BUMP
(vii) Attach rear screwjacks to V-DOSC BUMP
(viii) Select 3.75 deg for rear points
To Next Page
Loading...
