d2, 2big, and 5big Network 2 User Manual 17
Caution: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from
another LaCie device or another manufacturer. Using any other power cable or power supply may cause
damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie
device. Failure to remove the adapter may result in damage and will void your warranty.
5big Network 2
Steps 2 and 3 should take approximately three minutes.
Connect the power supply to a wall outlet and to the NAS.1.
Turn the device on via the power button on the back of the enclosure.2.
To Next Page
Loading...
