LACO PROTOCOL DESCRIPTIONS TITANTEST™
121
© 2018 LACO TECHNOLOGIES, INC. - TitanTest itra01en1-07 SB.fm - 1807
402 0192 Leak rate filter UINT8 R/W Leak rate filter
0 = Dynamic
1 = Static
2 = Without
406 0196 Serial number leak detector CHAR[16] R Serial number of leak detector
409 0199 Zero with Start time [s] UINT16 R/W Zero with Start time [s]
410 019A Zero mode UINT8 R/W Zero mode
0 = Disabled
1 = Enabled
2 = with START
419 01A3 Calibration request enable UINT8 R/W Calibration request enable
0 = disabled
1 = enabled
420 01A4 Volume UINT8 R/W Volume
(Volume >= Volume min)
421 01A5 Volume min UINT8 R/W Volume min
427 01AB Calibration access UINT8 R/W Calibration access
0 = disabled
1 = enabled
428 01AC Calibration unit UINT8 R/W Calibration unit
0 - mbarl/s
1 - Pam3/s
2 - Torrl/s
3 - sccm
4 - sccs
5 - Atm ccs
(6 - ppm)
(7 - g/a)
(8 - oz/yr)
6...8 only in Sniff
430 01AE Pressure unit UINT8 R/W Pressure unit
0 = mbar
1 = Pa
2 = atm
3 = Torr
Command Name Data type R/W Meaning
dez hex
To Next Page
Loading...
